plaster hand jewelry

Plaster hand jewelry. I will show you a very easy and useful creation i 've found at www.gearsco.com






You will need

- 1 kg of plaster

- Thick rubber gloves

- A timber of 20 x 30 cm.

- A glass

- Pencil

Process:

We took a cup or so, the measure of diameter of the wrist of the glove and mark a circle at one end of the timber.

With the help of a drill and a jigsaw to cut the wood we follow the line, without leaving much of it. With sandpaper will polish the circle we have cut.

We will put the glove in the hole and staples it on the edge of the wood.

Now prepare the mixture of water and plaster. Add water to a container, use the other glove to see how much you need. Sprinkle the plaster on the water. Think you do not have to be neither too liquid nor too thick. They have about 5 minutes before the gypsum begins to set.

Strip the mixture inside the glove helping to distribute well the glove fingers lest air bubbles remain on the fingers.

Let it set for about 48 hours.

And finally you can unfold making small cuts to the glove to help pull the fingers.

Now it' s ready to add all your jewelry, rings, bracelets, necklaces ... 

 

source: http://www.gearsco.com